Cheap Alternative Polymeric Materials To Abs

Cheap Alternative Polymeric Materials To Abs In recent years, fused deposition modeling (FDM) has become a widely used technology in rapid prototyping process. Typically polymer materials used are acrylonitrile butadiene styrene (ABS) and polycarbonate (PC). The polymer is fed into equipment as a 1.6mm diameter, which is heated and extruded onto a building platform. The ABS filament sold by the equipment suppliers is very expensive at aroundà ¯Ã‚ ¿Ã‚ ¡270 per kg [1]. Also, during the FDM process, some of this material is used as build supports and which is simply thrown away after being removed from the parts. This project aims to use alternative materials for the FDM process. 1.2 Previous Work of Project This project is followed by a summer 2009 project that Yifei Zhang did. In Zhangs project, one grade of virgin ABS has similar melt and flow properties to the benchmark material, but due to the limitations of laboratory equipment and project funds, Zhang cannot get the result. Zhang also try to use WEEE ABS as a potential source, but the degree of purity (98%) could not be accepted in FDM operation. In addition, a nylon strimmer line was found which had the suitable filament diameter, but it also failed because of the viscosity of the materials. 1.3 Objectives of Project After summarize the Zhangs experience, the target of project is to identify the cheap alternative polymeric materials to ABS. Before the project, a further polymer understanding of the melt and flow properties should be reviewed. Some problems Zhang met need to be solved to successfully produce the product. Some experiments, which Zhang did, need to be repeated to have a better understanding of this project. Some trial materials are aimed to produce the products, and then the properties of product are evaluated. 2. Literature Survey 2.1 Why use rapid prototyping methods? Rapid Prototyping (RP) is defined as the use of a computer aided design (CAD)-based automated additive manufacturing process to construct parts that are used directly as finished products or components[2]. Generally, it is a quick way to turn a virtual design to a real model. There are many purposes for a prototyping, for example, validate system specification or deliver early proof of concept or create a market demo [3]. The best reasons to rapid prototyping is to save time and save money. A complete product design cycle is very long, and there are a lot of trials and errors in the processing. The rapid prototyping processing can be used to modify the trial and debug the prototype in a short time. In addition, the resources can be saved by producing reduce scale model. 2.2 Rapid prototyping equipment With the development of modern science and technology, techniques of rapid prototyping technology increasingly diversified, such as stereo lithography (SL), laminated object manufacturing (LOM), selective laser sintering (SLS), selective laser melting (SLM), fused deposition modeling (FDM), ink jet printing (IJP), 3-D printing (3DP) [4]. There are three categories according to the raw material used in these processing. They are liquid-based system, powder-based system and solid-based system [2] [3]. FDM belongs to solid-based RP processes. The product made by FDM operation can be used as trial tests or for further studies, which reduces the risk of designing mistakes. 2.2.1 Stratasys FDM System Fused Deposition Modeling (FDM), which invented by Stratasys Inc, is used in the project. Generally, FDM is a typical PR process, which contains a computer controlled, and micro-extrusion system. In the process, the polymer is fed into the equipment as a 1.6 diameter filament, which is heated and extruded through a die as a 0.5mm fluid filament. By lay down of the melt filament from nozzle, certain thickness of 2-D layers structure is formed, then by repeating the process for the second layer, repeat this process layer by layer, then a complex 3-D structure is formed. As can be seen in Fig 1, the processing route follows the design, forming and finishes these three steps. In the route of this manufacture, pre-process CAD file is designed by FDM Quickslice software and saved as STL format [6], and then during the manufacture part, the thermoplastic material is extruded and formed layer by layer on precise paths. Remove the support structures then the final product is completed. Extrusion process is a key step in the FDM manufacturing [Fig 2]. Generally speaking, the polymer filament is in solid state when feeding into the FDM machine. The filaments of molten thermoplastic are extruded from a heated nozzle. The process lays down both support material filament and build material filament for one layer at a time. The diameter of the filament is about 1.67mm, and the range of diameter of different tips is from 0.025mm to 0.4mm. Functional prototyping is used via an additive fabrication system. Manufacturing tools and End-Use parts also can be produced with FDM system. There are many advantages including streamlining the development process, reducing the cost and getting to the market faster [7]. The disadvantage is obvious, the price of cartridge is very expensive, and ABS build (including the breakaway materials) is  £275.00 per kg. So find the cheap alternative material is the target of the project. 2.2.2 Mesostructure of FDM ABS [8] There are two kinds of mesostructure during the FDM processing [Fig 3]. The aligned mesostructure is the standard model of the machine. Another skew mesotructure uses the alternating jogs of length 0.5(W+g) in the ProEngineer drawing [Fig 4]. A correction in the nozzle height setting, ÃŽÂ ´ z (see equation 1), using the z-direction shrinkage factor, is set in the QuickSlice program. The void density on the material plane i is defined as 🙠 see equation 2). The extent of circumferential fiber-to-fiber bonding is quantified using a cross-section average of the fiber-to-fiber interface bond length densities. For a single fiber, it is defined as: (see equation 3) According to Jose, James and John, the same filament materials (ABS P400) and the same serial FDM machine were used to test. So the data have the reference value. As can be seen in Fig 5, the lowest void density value is the skewed configuration structure. From the chart above (Fig 5 Fig 6 and Fig 7), Fiber gap (g) and flow rate are two key factors on mesostructure while temperatures (Te and TL) had very little influence. So for the best properties, minimum void and maximum bond length are needed. 2.3 Alternative material 2.3.1 Standard Material The current materials using for the FDM manufacturing process are supplied by Stratasys Inc, which could be ABS plastic, PC and wax [9]. The P400 ABS, whose main mechanical properties can be clearly know in Fig 8, bought from the machine vendor was used as benchmark this project, provided as white filament with a diameter of 1.67mm and a  ± 0.02 mm tolerance, measured by laboratorys calipers. 2.3.2 Recycled ABS Recycled ABS, I think, still is the most ideal choose in this project. The recycled WEEE industry is growing by more attention nowadays. Compared to virgin ABS, the price of WEEE ABS is rather cheap. Due to the problem of the degree of purity in former project, one solution of project is to investigate methods of filtering recycled ABS for FDM. During recent years, some researches about WEEE have been carried out [11] [12]. There are similar results on their reports. With the respect to the properties of virgin ABS, a decrease in mechanical properties (except the modulus of elasticity) was recorded for both PC/ABS and ABS/HIPS mixtures [11]. One approach to different characteristics of recycled polymer was reported by Liang [13]. The contaminants of these recycled polymers are showed in Fig 11. Previous degradation levels ABS and WEEE ABS FTIR spectra for WEEE ABS can be compared with virgin ABS to estimate differences. According to Balarts research, small degradation in ABS was evaluated in the FTIR spectra (Fig 12). The hydroxyl groups which absorb near 3250cm-1 shown, and the carbonyl groups, which absorb near 1750cm-1 missed in the spectra [11]. 2.3.4 Mixture of ABS/PC system According to Balart [11], Equivalent Box Model (EBM) was carried out to analysis the mechanical behavior of ABS/PC blends. EBM can obtain a range of tensile values of blends. Fig 13 shows different curves with the critical values and different A values which is an experimental parameter related to the various interaction forces along the interface. As Balart pointed, the optimum range between10wt% and 20wt% PC in mixture shows an industrial material with balanced properties [11]. One reason is that mechanical ductile properties do not decrease [11]. Furthermore, according to Arnold, the mechanical properties of recycled ABS, especially ductility, are significantly affected by gas evolution during the process of ABS from WEEE [14]. Tarantill and Mitsakaki have done some tests about the proprieties of ABS/PC blends. In this project, more can be dig deeper in ABS based on the Zhangs work. First, FTIR spectra can be used to compare the virgin ABS, after processing ABS and WEEE ABS. The relationship between WEEE ABS, after processing ABS and standard ABS should be clear in this project. Second, ABS/PC mixture is one way to investigate. In Balarts report, the optimum range is 10wt% to 20wt%; the mechanical properties of this range also have a good performance. Furthermore, to refine the WEEE ABS is also one way, but due to the current situation; it is hard to find a process to increase the purity of WEEE ABS (98%). Simply mix one equivalent part of purity ABS and one equivalent part of WEEE ABS may be possible. Higher purity of WEEE ABS may have better properties. 2.3.5 Alternative Nylon Source According to Zhangs research, Nylon could be an alternative material to replace the ABS P400. Compared to the ABS, Nylon have lower price. In the laboratory, nylon strimmer line has already been produced into filament with the same diameter as benchmark P400 ABS. It is easier to get the raw material. One key factor for this alternative material is melt temperature when nylon as a sample. The recommend FDM operation on standard P400 ABS was 100oC higher than the melting point. Among the nylon-6, nylon-12 and nylon-66, nylon-12, which could be a potential material, has the lowest melting point 179oC [15]. Compared to P400 benchmark, the melt mass flow rate can be a reasonable range from 7.0 to 20 [16]. During the Zhangs trial of nylon material, 300oC is the highest temperature limitation for liquefying the FDM machine, but nylon-6 need higher. So glue gun can be used for higher FDM operation temperature. The further properties of the Nylon product need to be evaluated in the experiment . 2.4 Measuring Instruments The target of the project is to find the alternative material to replace the ABS-P400, before that, the properties of ABS-P400 and after processing ABS should be investigated. By comparing the differences of these two materials, the possible of re-used after processing ABS is demonstrated. Moreover, the data of the standard material can be the reference of the alternative materials. The main equipments and tests may be used below. 2.4.1 Melt Flow Index (MFI) Viscous Flow According to Zhangs report, viscous flow of the material is the key to this project. Low viscosity simply means that the materials are able to flow easily [2]. Viscosity is lowered significantly by increasing temperature according to the equation 4: Where 0 is a constant, Q is the activation energy for flow, R is the universal gas constant and T is absolute temperature. In this project, MFI is used to measure the viscous flow. According to Zhang, the some MFI results were obtained. MFI Instrument The Melt Flow Index (MFI) is a way to measure the ease of flow of the melt of a thermoplastic polymer. In Farlexs free dictionary, it is defined as the weight of polymer in grams flowing in 10 minutes through a capillary of specific diameter and length by a pressure applied via prescribed alternative gravimetric weights for alternative prescribed temperatures[17]. One conclusion of Balart is that extrusion and injection moulding process are very important to ensure good mixing conditions and homogeneity. MFI measurements were used with an extrusion plastometer [11]. Flow rate, whose unit is g/10mins, reflects the melt polymers features. In this project, there are two criterions for different grades of ABS plastic. One is 2200C/10kg for injection moulding condition, which is a general standard of flow property. Another condition 2700C/2.16kg, which is a special condition for FDM condition (in Zhangs report), need to be evaluated. Because the working atmosphere of FDM is complicated, t he push force of extrusion cannot be constant due to the different speed of extrusion. To simulate the environment of FDM, the push force must be understood. The data of MFI will have the value of reference. In this project, the difference of MFI between virgin ABS and reused ABS will be evaluated. In theory, for the thermal plastic, repeated heating and cooling cycle does not change the size of the plastic molecular chains, so MFI should not be changed [18]. However, storage conditions of reused materials are usually poor, usually placed at random, the properties of material are mostly metamorphic. According to Zhangs report, sample drying should be mentioned due to the absorbent of polymer. This element will greatly affect the accuracy. The specimens including ABS and nylon were put into oven for 2hours at 900C for ABS (1200C for PC) [13] and keep dry condition to prevent further water absorbing. The other factor affecting precision is cleaning. Die diameter affect the speed of melt flow. It is easy to have the deposition in the inner wall. The test result reduces due to the increasing of resistance of melt flow. So the cleaning is very important element to the accurate. 2.4.2 Capillary Rheometry Equipment Capillary rheometer is another way to measure the viscosity of the materials. The polymer is put into a test tube with a known diameter, and there are several horizontal marks scribed on it. When put some pressure to the polymer, a vacuum is used to get the flow polymer, and the time required is measured for the melt from one mark to another. Elliott [19] explains this device also can test the density and surface tension. 2.4.3 Fourier-Transform Infrared Spectrometers FTIR test designed in this project is to show the different molecules in the trial materials other than ABS P400. FTIR test is to evaluate what is the material composition of the FDM ABS and after FDM processing material, and to find out whether after FDM processing materials become degenerate. Fourier-transform infrared (FTIR) is based on the interferogram, which is the idea of the interference of radiation [20]. A single is produced by the change of path length between the two beams; the changeable of distance and frequency are convertible by the mathematical of Fourier-transformation [20]. The most common interferometer used is a Michelson interferometer. There are two perpendicularly mirrors which are bisected by a semi-reflecting film (Fig 2). The two beams defected from theses mirrors return to the beam splitter where they recombine and interfere. The moving mirror supplies an optical path difference, which controls the transmission and reflection. 2.4.4 Glue Gun According to Zhangs report, nylon strimmer line has been produced with the same diameter as benchmark P400 ABS. However, it was found that the strimmer line was unable to extrude from the FDM tip as need. When the temperature gets to 295 oC, which is the highest temperature limitation for liquefying the FDM machine, a small amount of material was extruded [21]. In this project, glue gun can be used to replace the tip to get higher temperature. The gun uses a heat element to continuous heat the plastic glue, the temperature of which can reach around 380 degrees [21]. 2.5 mechanical rest 2.5.1 Tensile Test The designing of tensile test aimed to evaluate the mechanical property among all alternative material. The specimen was studied by tensile test using a Lloyd LR50KPlus materials testing machine (Fareham, UK). For each selected building material, the testing samples were produced on three patterns of raster orientation, which built up in X, Y, and Z axis respectively. All tensile test samples were made with ISO 527-2-5A standard with a dumbbell shape. According to Zhangs report, benchmark P400 ABS sample was test, the result shows in Fig 10.

Images and Imagery within Shakespeares Macbeth :: GCSE English Literature Coursework

The Reinforcing Imagery Within Macbeth      Ã‚  Ã‚  Ã‚  Ã‚   In the classic Shakespearean drama Macbeth it seems that every scene is laden with copious imagery - and for a purpose. Its intended purpose is to play a supporting role for more important facets of the play, for example theme.    In his book, On the Design of Shakespearean Tragedy, H. S. Wilson interprets the imagery of Macbeth:    Macbeth is a play in which the poetic atmosphere is very important; so important, indeed, that some recent commentators give the impression that this atmosphere, as created by the imagery of the play, is its determining quality. For those who pay most attention to these powerful atmospheric suggestions, this is doubtless true. Mr. Kenneth Muir, in his introduction to the play - which does not, by the way, interpret it simply from this point of view - aptly describes the cumulative effect of the imagery: "The contrast between light and darkness is part of a general antithesis between good and evil, devils and angels, evil and grace, hell and heaven . . . and the disease images of IV, iii and in the last act clearly reflect both the evil which is a disease, and Macbeth himself who is the disease from which his country suffers."(67-68)    Roger Warren comments in Shakespeare Survey 30 , regarding Trervor Nunn's direction of Macbeth at Stratford-upon-Avon in 1974-75, on opposing imagery used to support the opposing notions of purity and black magic:    Much of the approach and detail was carried over, particularly the clash between religious purity and black magic. Purity was embodied by Duncan, very infirm (in 1974 he was blind), dressed in white and accompanied by church organ music, set against the black magic of the witches, who even chanted 'Double, double to the Dies Irae. (283)    L.C. Knights in the essay "Macbeth" explains the supporting role which imagery plays in Macbeth's descent into darkness:    To listen to the witches, it is suggested, is like eating "the insane root, That takes the reason prisoner" (I.iii.84-5); for Macbeth, in the moment of temptation, "function," or intellectual activity, is "smother'd in surmise"; and everywhere the imagery of darkness suggests not only the absence or withdrawal of light but - "light thickens" - the presence of something positively oppressive and impeding.   (101)    In Fools of Time: Studies in Shakespearean Tragedy, Northrop Frye shows how the playwright uses imagery to reinforce the theme:

Advanced Database Systems

Crystal Reports is business intelligence software for allowing other database applications to integrate with it for designing and fetching reports for business and commercial purposes. The format and the style of the report can be designed along with it and it provides mechanism to be linked with several other types of database and front end applications. The following are the various procedures and methods for producing such reports: · Usually in the form of rows and columns. · Can also take the form of pie charts, bar charts and nested summary tables. · It is also possible to run a crystal report without using the software itself; it is done with the help of viewers, schedulers and other report distribution tools. · It is a package with a set of ActiveX controls which can be integrated or embedded with several GUI tools to provide a separate user interface (Crn.com, 2007). ·Ã‚   It supports data sources from databases like Oracle, MS SQL, MS Access, IBM DB2 and other appl ications like spreadsheets, text and XML files.Actuate is another product which combines business intelligence product which can combine with SQL Server and Access. It also carries the following characteristics: ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   One can develop reports for further development in future ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Deployment of reports are possible ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   It handles end user reporting and analytics ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   It is also used for object designer ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The report also serves performance management and takes care of data integration.Data warehousing is a concept that is used for storing organization’s data and is usually termed as corporate memory. It contains the raw material for an enterprise’s MIS or DSS system. The analyst can perform complex queries which would be used for getting results and further interpretation of the data and the resultant information (W illiam, 2000).The subject oriented feature of the data warehousing takes into account the various elements that take place in the real world. It is non-volatile and integrated with respect to the data that they are never deleted and contains all the information with regard to business processing by the enterprise for all its operations.Data mining in contrast is filtering the data for the purpose of deriving a knowledge from it which is not possible for getting the trends of data from simple databases.It uses complex technologies for getting the better meaning of the data and its analysis. It is generally used for mainly two purposes namely knowledge discovery and prediction that roughly means that future prediction of events and patterns are found for getting the knowledge out of it for business intelligence purposes (Frawley, 2001).Online processing is termed as one that is done simultaneously as the user clicks and operates online. The system responds to user behavior and makes c hanges to its system accordingly for action. It promotes simplicity and efficiency for a reason that the user is not required to wait for any operation to take place for general criteria.The advantages of distributed databases over centralized database can be termed as follows: ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Costs: The costs of maintaining of the distributed database at several locations are expensive with relation to technological costs, labor costs and running expenses. In return the centralized database is housed in a single particular location and saves costs. ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Benefits: The benefits of distributed database would be the structured-ness, improved availability, better fault tolerance, performance and modularity in modification and changing its contents. In case of centralized database, costs can be less but they are vulnerable to fault tolerance and availability reasons that forms good amount of reason to switch for a distributed structure. ReferencesCrn.com (2007). Retrieved 20, December 2007 from http://www.crn.com/software/164301546.Frawley W.(2001). â€Å"Knowledge Discovery in Databases: An Overview†. AI Magazine: pp. 213-228. ISSN 0738-4602.William H. Inmon (2000). Using the Data Warehouse, John Wiley & Son's, ISBN 0-471-05966-8.

Reflection Paper - 1453 Words

Reflection Paper Shannon B. Payton Liberty University Introduction This paper is about reflecting on what was covered in Theology 104. There are many Christians who understand that God loves us and wants the best for His children. There are many subjects, videos, and extracted material that has been read or discussed over the span of four weeks which has given me a better understanding of the Bible and Christianity. My reflection for this paper I have chosen two topics that I have chosen to address for this paper. First, topic I have chosen will be Grace and secondly I will be focusing on Love. Grace Theological definition of â€Å"grace† as many scholar s of the bible will define this word as the unmerited favor of God toward†¦show more content†¦Biblical Foundation God created man in his image and breathe life into him to include woman (Genesis 2). Love was being shown by God in his creation. Not only did created man and woman but he also gave them free reign of the Garden of Eden. He walked with them, had conversation with Adam and Eve. The foundation for love started with God’s creation. Throughout the bible there is foundation of love or agape love (god’s love). From Genesis to Revelation the entire bible speaks of the love God has for his people. The only definition for love is God and He is love. Practical Application Love is often linked to your heart and with your heart it generates a lot of emotions. I know for me when I first met my husband; I was giddy, clumsy, and shy and could hear my heart pounding in my chest. Nevertheless, as time passed, my heart began to have a normal beat. Often times there are those who heart beats to different drum. In addition to the difference of the heart beat there are many ways love is reciprocated. First sign of love you have an irregular heart beat and even mentioning name of the person who you love will cause your heart to beat irregular. There is no feeling like being love and having someone to share that love with. Love causes you do many thing but there is one love that searches the heart and bring clarity to you. God loves does causes youShow MoreRelatedReflection Paper1317 Words   |  6 Pagesused to struggle with forming my thoughts into writing, let alone a paper. I was never confident with what I wrote. My writing had no gre ater purpose other than the assignment. My writing process included: writing my paper, proofreading it, and turning it in. Once the paper left my hands, it also left my mind. Throughout this course we worked with others, visited the writing lab, wrote critiques, and we were able to revise our papers. I believe that all of this is has caused me to grow greatly as aRead MoreReflection Paper836 Words   |  4 Pagesand integrating quotes. Before my papers were full of â€Å"she said† and â€Å"she would say†; which was boring and showed poor ability to lengthen my word choice. I also had a tendency to just throw quotes in and not integrate it into my writings. By the end of my English 101 class my papers began to present with words like â€Å"the author noted†, or â€Å"she stated† along with many other word choices and proper ways of using quotes. Here is an example from my final research paper: â€Å"Author Stephanie Jackson, a certifiedRead MoreNursing Reflection Paper858 Words   |  4 Pagesremainder of this reflection. I met Betty about eight years ago, as I was a close friend of her brother. Although her brother and I grew apart, I would still occasionally see Betty around. Never did I think that I would ever see her on the unit in which I was working, but a few weeks ago, this idea changed. When I arrived back to the nurse’s station after checking on each of my patients, I saw that my co-caring nurse was getting an admission. I looked down at the sheets of paper he had in front ofRead MoreReflection Paper On The Humanities Field1071 Words   |  5 Pages Over the course of this semester each paper that was written helped to introduce me and my fellow classmates to different formatting, and genres of writing. A lot of knowledge was gained from writing these papers and I was able to compare and contrast the disciplinary writings and notice what makes each of them stand out. Reflecting back on these individual papers helps to express what I have learned. The first paper that was written was the humanities essay. The humanities essay helped to provideRead MorePersonal Reflection Paper On English1015 Words   |  5 Pages Reflection Paper English has never been my strong suit. I always hated English simply, because I never concerned myself as a writer. I always stuck to the bare minimum and was pleased to know that I passed. I honestly never tried hard in English because I never felt good enough. I did not see myself as a confident writer and I am not sure I ever will. Since, being enrolled in English 201, it supplied some challenges that I was not ready for and felt unsuited for. Along the way, I learnRead MoreReflection Paper Boat Design839 Words   |  4 Pages When assigned a project that involved building our very own boat, each boat design was created with inspiration from things in our own lives. My design was inspired by my interest in the origami paper boat and rafts. A flaw in this design was that, making the boat like a raft included the use of straws in which was a material not available for this project. Other designs included one of a boat from Isis Green’s favorite movie Pirates of the Caribbean, a design from a fantasy summer place imaginedRead MoreReflection Paper On Writing And Writing1085 Words   |  5 PagesThe content of my paper was typically not the issue, the organization of the ideas was. I always had good ideas to write about, but I never knew how to organize those thoughts into a well-organized paper. Although in Writing 101, I used the multiple steps of the writing process to insert my ideas into a well-written paper, I continued to struggle in areas such as grammar and mechanics. In Writ 102, I was able t o realize that the writing process develops over time, and the best papers result from revisionRead MoreReflection Paper : Barbie Q By Sandra Cisneros938 Words   |  4 Pagesexploration paper, the reading and writing paper, the annotated bibliography, and the academic research paper. The semester began with basic lessons on general writing rules during class and progressed into a much more complex course, including lessons on expansion and development of evidence and supporting details, as well as the argument of the paper as a whole. Although each assignment taught something new, each built onto the last and helped transition my progress through each paper. The firstRead MoreReflection Paper On Reflection1076 Words   |  5 Pagesknew how to write short story analysis papers, or your run-of-the-mill story reflection. After hearing I would have wrote a total of 5000 words minimum, I was left flabbergasted. Nevertheless, the challenges faced when writing these papers gave me an abundant amount of knowledge in transitional word use, and finally becoming comfortable with the drafting process. When writing my papers, however, I still would like to increase my ability to structure my papers with more confidence. Before this periodRead MoreReflections Paper1552 Words   |  7 PagesComfort and Gods Glory Ray Kirby Liberty University In the decision to discuss two topics included within this reflection paper I have been led to discuss two doctrines that are close to all Christians. The comfort of God and the glory of God are the two doctrines that I have focused on over the last several weeks. The comfort of God has touched me at times over the course of my life however, never as much as it has over the last year. I wish to praise the glory of God as directed within

Essay about Dancing Skeletons Life and Death in West Africa

Anita Grooms Anthro 110 T-TH: 9:30am-10:45am Dr. Anderson 3-7-13 The United States is known for the â€Å"American Dream†, the material items, our breakthroughs in medicine, our employment opportunities, etc. These are just some of the things the United States has to offer, but the United States also has a downfall to all of the â€Å"good† things in life: we think our way of life is better than everyone else’s, and we often judge other countries, especially Africa, for their way of living. We often ask the questions, â€Å"What if we go to help them?† or â€Å"How can we help them?† when the real question is: â€Å"What can we learn from them†? Dancing Skeletons: Life and Death in West Africa is a non-fiction book written by Katherine Dettwyler, who†¦show more content†¦A huge part of the economics of the people of Mali is the Grande Marchà © in downtown Bamako. Basically, the Grande Marche is just a big market, where venders of all variety came to sell their goods. Another thing that plays a b ig part in the economics of Mali is the no-fixed rates on items. Unlike the United States where everything is not negotiable, in Mali, everything is and is encouraged, unless you’re a tourist without any background on the culture of Mali (Dettwyler 1994: 55). With Mali’s economics very different from ours in America, family size and gender ideas also are very different than ours. Family size in Mali is very important; it is not considered a burden like in the United States where a couple of children is common. In Mali, it is common for women to have six to eight children by the time they are considered â€Å"old†. In the United States, the more children you have, the more you have to provide for, but in Mali, the more children you have measures a man’s status and success, and that’s for each of his wives. The more children you have not only provide those two things, but increases the income of a family because children in Mali, at a young age, may start to work to provide for their mothers and younger siblings. Unlike in a western society, the wealth flows up in a third world country. In Mali, a man is prosperous when he has a house full of children, and grandchildren who honor him, work for him and support him in his oldShow MoreRelated Dancing Skeletons: Life and Death in West Africa1701 Words   |  7 PagesAlthough the !Kung San of southern Africa differ greatly from the people in the west African nation of Mali, both areas share similar problems. Both suffer from diseases, illnesses, malnutrition, and having to adapt to the ever changing and advancing cultures around them. What I found to be the most significant problem that is shared between both areas is that the people suffered from a lack of education. In the book Dancing Skeletons: Life and Death in West Africa by Katherine A. Dettwyler, thereRead MoreDancing Skeletons : Life And Death Throughout West Africa By Katherine Dettwyler, All You Can Think2334 Words   |   10 PagesMarbaugh Anthropology 105 S. Home Hogue October 13, 2014 â€Å"Dancing Skeleton† While reading Dancing Skeletons: Life and Death in West Africa by Katherine Dettwyler, all you can think is â€Å"what if I had had to live in a culture like this?† Katherine Dettwyler is an ethnography that primarily study how children feeding and weaning customs, and continuing malnutrition directs to a higher likely hood of children being more likely to perish from life threatening childhood illnesses, for example: malariaRead MoreDancing Skeletons : Life And Death1239 Words   |  5 PagesIn the book Dancing Skeletons: Life and Death In West Africa (published in 1994), the core argument is best shown when the author, Katherine A. Dettwyler, says on page 142, â€Å" What is wrong with this picture?† Suddenly, it dawned on me. The children- dancing with abandon, smiles on their faces looked like dancing skeletons. They were the living embodiment of Camille Saint-Saen’s â€Å"Dance Macabre. â€Å"They were the warrior skeletons from Ray Harryhausenâ€℠¢s film Jason and the Argonauts-dancing, instead ofRead MoreDancing Skeletons : Life And Death1470 Words   |  6 PagesIn West Africa, Dettwyler s story of malnutrition takes place and is shown in her book, Dancing Skeletons: Life and Death in West Africa. She addresses important issues such as ignorance in nutrition. She also addresses some of how Islam has become part of there culture as time has gone on and as the country becomes more civilized. Muslims in Mali did were not perfect Muslims and did not do everything they were supposed to but their deepest roots came from Islam. Dettwyler addressed some very difficultRead MoreDancing Skeletons Essay2599 Words   |  11 PagesMeagan Conrad ANT-103 Rough Draft March 16, 2012 Transfixed by Dancing Skeletons Katherine Dettwyler’s work in the field while she was in West Africa was exciting, filled with humor and even terrifying at times. She dealt with seeing various life-threatening diseases that affected the lives of children her daughter’s age, as well as adults. Dettwyler found that almost all of the people she came in contact with were completely oblivious and uninformed of the ways to prevent diseases such asRead MoreComparing The Endicotts And Dettwylers Ethnographies1773 Words   |  8 PagesWas a Woman (collaboratively written by both Kirk M. Endicott and Karen L. Endicott) and Dancing Skeletons: Life and Death in West Africa (written by Katherine A. Dettwyler) both have anthropological focuses on the cultures and practices of various tribes from different countries, however, their accounts and approaches in their situations differ greatly from one another. The former studies the ways of life of a certain people, while the later targets the health issues of anoth er. In The HeadmanRead MoreCultural Diversty within Healthcare1031 Words   |  5 Pagesworld can open up anybody’s eyes to see that culture makes a huge impact on the understanding and practices of healthcare that seem to be so common to other areas of the world. When a person lives in one country their whole life, that person may not realize how different the life they live is from someone in a foreign country. If a person is going to receive treatment from someone with a different cultural background, they should be expected to get treatment to respects their own culture. MassachusettsRead MoreThe Black Death : The Bubonic Plague Of The Thirteen Thousands Swept Through Europe Essay1298 Words   |  6 PagesTaylor Hurst Dr. Reedy College English 13 October 2016 The Black Death The bubonic plague of the thirteen hundreds swept through Europe, claiming the lives of one-third of its population in merely three years. This was the most horrific epidemic the world has seen to date. Poor sanitation practices, improper burial of corpses, and insufficient systems for waste removal were important factors in allowing the plague to manifest (Byrne 31). Infected fleas and rats, brought by trade ships and theRead MoreMandinka Empire21578 Words   |  87 PagesBound to Africa: the Mandinka Legacy in the New World Schaffer, Matt. History in Africa, Volume 32, 2005, pp. 321-369 (Article) Published by African Studies Association DOI: 10.1353/hia.2005.0021 For additional information about this article http://muse.jhu.edu/journals/hia/summary/v032/32.1schaffer.html Access Provided by your local institution at 03/10/13 1:43PM GMT BOUND TO AFRICA: THE MANDINKA LEGACY IN THE NEW WORLD MATT SCHAFFER I I offer here a theory of â€Å"cultural convergenceRead More The Facade of Civilization Explored in Heart of Darkness and Heart of the Matter2703 Words   |  11 Pagesconcentrates on a few main characters. Also the setting, though somewhat similar, is still quite distinguishable, allowing for the development of different themes; Conrads is set in a wild outpost deep in the center of Africa and Greenes occurs in a well-colonized port somewhere in West Africa. The natural forces of depravity are rampant, in fact infective, in the steamy, dense jungles in which Kurtz dwells. Scobie, on the other hand, is allowed a more physically peaceful existence, struggling not with

Online Dating Becoming An Art - 1611 Words

Bars and clubs have long been the stomping ground of beautiful, socially outstanding individuals. For the remaining population, these places have long been intimidating, awkward, and stuffed full of unsuitable prospects. What would it mean to a lonely person to know that the next big love of their life could be just a few mouse-clicks away? Enter the online dating sites, with its anonymity, lists of potential dates, compatibility indicators, and virtually instant results. A guaranteed sellers market! As if this wasn t alluring enough, Online dating sites feature gushing testimony on their front pages along with lists of marriages for which they take full credit, thank you very much, and all of this good news is decorated with photos of happy, smiling couples. That s all very effective. There are now so many online dating sites that specialization among them has become an art form: you don t even have to be looking for a soul mate anymore - a casual fling to boost the ego is centra l to the services supplied by many dating sites. Anything you might want, you can find a dedicated online service that caters to it. Seriously. Anything. One hundred years ago, a person s entire social life was limited to a village, region, or area, a life long localization of activity defined by a lack of mobility, and perhaps in most cases, a lack of inclination - why move around when all you need is all around you? The stock of potential lovers was limited to the local singles. One fellShow MoreRelatedOnline Dating And Its Effects On The Internet Dating World1197 Words   |  5 Pagesup to the emergence of online, social dating. These online dating site have change the way relationships interact, gossip, flirt and communicate. However, numerous people do not understand the deception and manipulation aspect that comes with online dating. Forming a passionate relationship over the internet under false pretense can be emotionally destructive. Several studies have been performed in an attempt to explain and understand the non-traditional world of online dating. The sources exploreRead MorePersonal Narrative : Why New World Technology1491 Words   |  6 PagesThe art of casual conversation, a cup of java or tea in the morning has taken a new direction. We are left with little in common between coworkers, friends, and family for lack of talking with one another. As a result, there may be an increase in work productivity and a decrease in our ability to speak and write proper English. Not many of us will enjoy the job of administrative assistant to the president because the automated systems will do the work. For example, the access to free online templatesRead MoreI Am Not A Drama Queen1611 Words   |  7 PagesProfile # 26: I have a dream of one day becoming very famous no matter what it takes. About me: Artistic and ambitious, I’ve read Shakespeare and taken drama classes. I am not a drama queen, but I live my everyday life like a movie star. If you’re not afraid of the spotlight, you can come and stand right next to me. I guarantee sparkles and fun 24/7. Profile # 27: Partying has kept me away from having a decent long lasting relationship for too long, now, I would like to settle down. About me: OpenRead MoreHow Technology Can Be Dangerous For Youth887 Words   |  4 Pagesshould I say, that children don’t think about when they are networking on social media, is the adult predator. According to the article â€Å"Children Must Be Protected from the Content of Social Networking Web Sites,† found on the Online Social Networking website, while on dating sites or even profiling media, kids do not remember to think about the sneaky adults that are targeting them. These adolescents are very vulnerable. They can accidentally give out too much information to these older people. LittleRead MoreThe Threats of Technology in Sherry Turkle’s book Alone Together,†1091 Words   |  5 Pagesand appropriately use technological products. The way in which people frantically communicate online via Twitter, Facebook and instant messaging c an be seen as a form of â€Å"Along Together.† Turkle describes this moment as â€Å"robotic moment,† which means that it is the very moment for high-technology’s role positioning. Turkle writes that â€Å"What if a robot is not a ‘form of life’ but a kind of performance art? What if ‘relating’ to robots makes us feel ‘good’ or ‘better’ simply because we feel more inRead MoreThe Effects Of Social Media On Society892 Words   |  4 Pagesbecome bad for a person. Society had reached a point where it is not necessary to have human contact in order to have a relationship. Instead of calling and talking to someone, people just chat through the internet or text message. People lost the art of conversation with today’s technology. Facebook launched in 2004 and has become a mega company. Last year, the company had 845 million users, revenue was $3.7 billion, and the estimated value of the company is $100 billion. There are negative andRead MoreGraduation Speech : Elementary School1127 Words   |  5 Pagesher teaching style and her enthusiasm for English, which seemed rare to come by with teachers who taught a senior level class. It was then that I knew I wanted to become a teacher and possibly major in English. Fast forward a few years, I started dating my fiancà © and was introduced to his niece (age 6) and nephew (age 2). At that point I had a flood of memories of when I was student in elementary school and remembered how much I enjoyed going to school, learning basic knowledge like my ABC’s, andRead MoreCommunication is the one key element of life that sets human beings apart from the rest of the800 Words   |  4 Pagestouch of a button or the click of a mouse, with this effectiveness however comes the issue of the world, as we know it decreasing due to the rapid growth of technology. The traditional ways of socializing and expressing oneself in great detail are bec oming a thing of the past and are rapidly being replaced by the growing technologically advanced products available to the every day consumer. It is argued that communication through technological means has its advantages such as speed and convenienceRead MoreGerrymandering: Election and Politicians1235 Words   |  5 Pagesï » ¿Gerrymandering The term gerrymandering refers to the practice of altering voting districts in order to achieve electoral results favorable to one person or party, usually the incumbent politician or party creating the new voting regions.1 This term, dating back to 1812, is an established method for incumbent politicians to improve their heresthetical â€Å"defense,† by manipulating the dimensions of the political landscape.2 This tactic is extremely common in the United States and a prime example of politiciansRead MoreEssay on Pros and Cons of Social Media875 Words   |  4 Pagesthe logic why people are unreasonably obsessed. Some people evolve into becoming isolated after using social media. Some might think that in addition, social media has an advantage that gives higher opportunities to have greater communications through social network, although in this case, it really isn’t. An interview with Sian Beilock; a professor in neuroscience at the University of Chicago, described people can end up online so often that they end up lacking face-to-face interaction. Having four

Effective Information Security & Risk Management Strategy - Samples

Question: Discuss about the Effective Information Security Risk Management Strategy For Small Medium Enterprises. Answer Introduction Companies of all kind of size are now most importantly dependent on IT and network for the functions of the business operations. Thus, all have a constant need to make sure that their system and information are protected in right manner against any kind of security breaches. But, there are so many evidences that suggests that security based practices are not upheld with strength within small as well as medium organization environments. The discussion also presents as a survey of security practices within such companies in countries like USA and Europe with specific attention on whether right attention is placed on issue associated with risk assessment (A. Harris and P. Patten, 2014). The study also reveals that small and medium enterprises are featured by lack of right attention on IT based security measures with associated accountability and it is constantly unassigned or allocated to someone without right qualifications. Security Threats At the time when company was facing new threats and vulnerabilities on a routine basis, the crucial step in setting the right security for the system is assessed properly that present risks to which it can be exposed. Without this, a company cannot ensure to have right kind of appreciation of the threats and vulnerabilities faced by its current assets and hence this will lead to the rise of the counter measures as well. A method to achieve is by conducting the proper kind of risk assessment which can be defined as a systematic as well as analytical procedure to focus on the likelihood that the present threat will further endanger an asset, people or operations and to recognize the work to decrease the overall risk as well as mitigate the results of the attack (Johnson, 2014). Assessment of the risk can be divided into two separate procedure and the first process of risk analysis can be discussed as the assessment based on threats to influence on issues and vulnerabilities associated with data and information processed from facilities and the chances of the occurrences. It also involves steps like recognizing the assets that require to be protected and recognition of threats as well as vulnerabilities associated with the assets. With this, there is a need to focus on the risk management process as well which are important for the SMEs as they lack all the necessary resources which are related to the human capital, database and the specific knowledge patterns as well. Here, the structured risk management are employed with the different positions where the focus is on the administrative function as well. The small and medium enterprise based study is conducted in places like Europe and US by different universities respectively, to make the right comparison between small and medium companies attitude towards security (Kimwele, 2014). The factor for considering geographical as well as distinct security and protection of data legislation applied on each place and the motive is to evaluate the extent and how they impact the approaches of the company to security. The study is presently ongoing and the solution in the paper are entirely based on study from different companies. The study has shown many facts that were unknown before and the absence of the risk assessment is not the only methods in which there is lack of awareness and can be properly manifested (Peltier, 2016). The findings also show that the small and medium enterprises usually lack a formal and documented security based policies. While considering the globally accepted standards like ISO 17799, the security standards are i mportant which leads to the handling of the risks management like the inadequate infrastructure, management and the technical expertise, lack of finance and the intellectual resources that are for the technological development and changes. Thus, what is acceptable in this case and what is not is also determined by the study. It is important to understand that without any specific and defined objectives, a company cannot be proceeding to comprehensive level of risk assessment (Soomro et al., 2016). It is also important to note that the companys security policy can be updated as per their findings. But the study also investigated the overall share of small and medium size organizations that have further documented the security policy. The discussion also indicates that in the survey, responses like dont know are effectively like no responses. But even if the company is concerned do have the right policy and this evidently does not promote it the staff and in an appropriate manner (Wan g, and He, 2014). Conclusion The discussion has shown many evidences of important security issues in SME level culture and it may further lead to experiencing many unavoidable security cases and this happened mainly due to not performing a risk based analysis and not executing the right corrective measures. Recent study has also shown that the cost of cybercrime recovery for small firm is huge since it covers clean-up as well as recovery from viruses based outbreaks that can put the company network out in action for many days and at the same time also produces an average cost of huge amount to clean the mess (Wu et al., 2014). But with identified constraints as per the expertise, awareness and budget, it is challenging to see how the current situation for SME will further improve without more basic changes to approaches present to them. One of the upcoming issues arising from the findings is the need for a new kind of risk analysis and management based methods which will focus on removing the disadvantages and help SMEs to evaluate the risk to which assets are exposed to (Wynarczyk et al., 2016). References Harris, M. and P. Patten, K., 2014. Mobile device security considerations for small-and medium-sized enterprise business mobility.Information Management Computer Security,22(1), pp.97-114. Johnson, P.F., 2014.Purchasing and supply management. McGraw-Hill Higher Education. Kimwele, M.W., 2014. Information technology (IT) security in small and medium enterprises (SMEs). InInformation Systems for Small and Medium-sized Enterprises(pp. 47-64). Springer Berlin Heidelberg. Peltier, T.R., 2016.Information Security Policies, Procedures, and Standards: guidelines for effective information security management. CRC Press. Soomro, Z.A., Shah, M.H. and Ahmed, J., 2016. Information security management needs more holistic approach: A literature review.International Journal of Information Management,36(2), pp.215-225. Wang, F.K. and He, W., 2014. Service strategies of small cloud service providers: A case study of a small cloud service provider and its clients in Taiwan.International Journal of Information Management,34(3), pp.406-415. Wu, D.D., Chen, S.H. and Olson, D.L., 2014. Business intelligence in risk management: Some recent progresses.Information Sciences,256, pp.1-7. Wynarczyk, P., Watson, R., Storey, D.J., Short, H. and Keasey, K., 2016.Managerial labour markets in small and medium-sized enterprises. Routledge.